loading
Quality Assurance

Our quality assurance program is documented in an approved quality assurance manual, which covers all manufacturing, sales and services procedures. We exercise stringent quality control measures for ensuring the accurate dimensions and mechanical properties of our products. Our quality assurance system assures each product to pass through following processes and quality systems:

  • Material Control System
  • Process Control System
  • Machining and Dimensional Control
  • Certification and Supplementary Test
  • Finishing and Marketing

Leveraging on our structured work process, quality is imbibed at all stages of manufacturing. Recognizing our efforts and dedication towards quality products and services, we have been awarded with ISO 9001 and ISO 2000 certifications and membership of prestigious associations.

Inspection and Test
Corrosion Test

This test is conducted only when specifically requested

Flange Test

The photo on the top shows a test piece subjected to the flange test. There are no cracks on the welded section or on the base metal.

Hardness Test

Hardness test is used in Rockwell 'B' scale for raw material / tube / pipe as per A 213 / A249 / A269

Bending Test

Each length of finished pipe is subjected to the hydrostatic or pneumatic pressure test. Each pipe must withstand the pressure without leakage.

demo-img
demo-img
Flattening Test

This test is conducted to check the strength of the welded section by subjecting, it to extreme compression stress. If the test piece withstands the specified compression stress without cracking, it is determined to be acceptable

Reverse Flattening Test

The photo shows an expanded view of a pipe interior. There are no cracks or blow holes can be observed on the welded section.

Hydrostatic/Pneumatic Pressure Test

As per ASTM-A450 & 530 Standards, 100% Hydrostatic is carried out on all pipes & tubes using Hydraulic & pneumatic system

Flaring Test

The standard procedure for this test is to flare the end of the pipe to a diameter 1.2 times the outside diameter. As shown in the photo on the right, no cracks are to be found at flared parts.

Universal Testing Machine

UTS is used for tensile strength / elongation and other mechanical testing

demo-img